Completed client project. The owners came to us for a whole-home remodel of their 1906, two-story wood-framed Victorian in Stockton, a 1,886-square-foot house on a 5,001-square-foot corner lot, with three bedrooms and two and a half baths. They wanted the arrival, porch, living room, kitchen and dining area, stairs, bedrooms, and laundry and back-storage room to feel more connected while preserving the house’s original character. Its white wood siding, gabled roof, wrap-around porch, upper balcony, ornate columns, and detached two-car garage gave us a clear starting point. Inside, refinished wood floors ran through the living room, stairs, and bedrooms; original mahogany walls and a living-room fireplace were worth keeping. The portfolio photographs are finish references rather than images of this house.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
My first question was how the family wanted the house to welcome them from the corner, and which original features mattered most to keep. The mature cypress trees shaded and sheltered the porch, while the concrete steps made the approach less comfortable. The upper balcony and wrap-around porch shaped how the house met both sidewalks and the yard. The home has two stories and a partial, unfinished basement, not a full basement, which informed how we approached storage and service access. Its central heating and cooling, along with a floor furnace, also shaped the room layout, so we kept the floor furnace clear and considered air movement throughout the rooms.
The corner approach, porch, and balcony
We began outside because the corner lot set the experience of arriving at the house. We selectively thinned dense planting around the mature cypress trees, keeping their shade and wind protection while clearing the view of the white siding and porch. We replaced the concrete steps and added exterior lighting at the approach and porch, making the entrance easier to read after dark. We refreshed the porch flooring where it needed more durable wear and repainted the porch ceiling in a contrasting tone that gave the entry definition without competing with the Victorian trim.
We also updated the balcony railing for safety while retaining its wrought-iron character. The railing, columns, and gabled roof remained part of the same composition, rather than being treated as separate decorative pieces. The lot is flat-appearing, with mature trees and established planting, so selective work was more appropriate than clearing the yard. The soil survey map identifies Jacktone-Urban land complex with somewhat poor drainage and up to 7.5 percent shrink-swell potential. Those mapped conditions supported keeping the exterior work focused on the porch, steps, lighting, and planting. The California Geological Survey’s Seismic Hazard Mapping Act program provides additional map context for the site (California Geological Survey, Seismic Hazard Mapping Act program).
The living room, kitchen, and original wood
The living room already had the features that gave the interior its identity: a fireplace, mahogany walls, ceilings approximately 9 to 10 feet high, and refinished wood floors. We kept those surfaces and carried the same respect for the wood floors through the stairs and bedrooms. The house’s original woodwork and flooring guided the finish choices, so the updated rooms could feel cohesive without covering the materials that give this Victorian its character.
The kitchen is large and has tile counters, a free-standing electric range, a hood over the range, and 220-volt electrical service. We improved its cabinetry and appliance function while keeping the established kitchen service locations close. The dining area remained part of the kitchen rather than being forced into a new, oversized open room. We arranged the kitchen and living-room furnishings to keep a clear route between them and preserve the fireplace as a visible focal point. The separate laundry and back-storage room has hookups only, so we kept its laundry arrangement straightforward and used the available storage rather than sacrificing it to enlarge the kitchen.
The house has public water and public sewer, and its partial basement offers storage without making every service run accessible. We kept plumbing changes close to existing service locations. The central heating and cooling stayed in service, with the floor furnace kept unobstructed; layered lighting helped the tall rooms feel comfortable without relying on one bright overhead source. The composition roof, two-story structure, and existing foundation remained unchanged. The result joined the house’s daily routes without erasing the distinction between the kitchen, dining area, and living room.
Foundation and permit boundaries
Stockton’s Building Division lists foundation changes and slab or underfloor service work as permit work; this scope kept the foundation, slab, and underfloor services unchanged (Stockton Building Division requirements). We kept the completed work focused on the existing porch, approach, and interior rather than expanding it into foundation alteration. The California Seismic Hazards Mapping Act sets the statutory context for mapped seismic hazards (California Public Resources Code section 2697).
Get in touch if you are considering a whole-home remodel.


