Completed client project. The owners came to us with a two-story, 2,014-square-foot home in Henry Ranch, San Ramon, built in 2001 with stucco and brick veneer, a concrete-tile hipped roof, and a slab foundation. It had four bedrooms and two and a half baths, with the four bedrooms, two bathrooms, and laundry upstairs. On Terraced Hills Way, the documented layout and visible finishes shaped our plan for the kitchen, family room, and connected shared area downstairs. The owners wanted those shared rooms to feel brighter and more connected, while keeping the family room distinct and the quieter bedrooms upstairs. We began by considering which window the family actually lived by, and where its morning and evening light landed. That answer organized the work around their days, rather than treating every room in the house as part of the project.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
The front windows and family room
We spent time on site following the light from the street-facing windows into the shared rooms. The windows were evenly spaced and double pane, and the front of the house received ample sun. We found that the daylight felt strongest near the windows and fell away as the rooms moved inward. The owners wanted the rooms to feel joined, but they did not want the family room to lose its identity or its fireplace. We kept the existing window locations and coverings, then planned finish and lighting changes around the way daylight already traveled.
The kitchen had already been updated, with stone counters, a breakfast nook, a gas range, and 220-volt power. We kept its working arrangement and did not shift the sink, range, or plumbing. Instead, we improved the relationship between the kitchen and family room through their existing connection, keeping the fireplace visible and the route through the shared rooms clear. The kitchen’s existing power and services made that choice practical: the work improved how the rooms felt without requiring a new service layout.
We chose warm, light-reflecting wall finishes to carry daylight farther into the shared spaces, rather than adding heavy trim that would compete with the regular window rhythm. We planned layered lighting, with general light for the rooms and more focused light where the family worked at counters. Lower, warmer lighting made the rooms comfortable after daylight faded. The combination gave the family choices through the day, instead of relying on one bright overhead setting.
The slab floor and the connection between rooms
The two-story construction and slab foundation shaped how we approached the floor and room transitions. On site, we found the floor met the slab, with no basement below to route services through. We measured the thresholds between the existing laminate, tile, and carpet before selecting the shared-room finish. That let us make the connected area feel more continuous without assuming that every floor in the house needed replacement. We kept tile where it served the room, and finished the shared area with a coordinated surface and clean transitions.
The owners had asked for a more open feeling, not an undefined downstairs. We kept the family room’s fireplace as its focal point and preserved the distinct uses of the adjoining spaces. The flat, 3,588-square-foot lot and attached two-car garage gave us no reason to expand the footprint; the useful change was inside, where light and circulation could improve without changing the house’s overall shape. The front porch, brick accent, and tiled roof remained part of the home’s character, while the interior finishes brought a quieter, more consistent feel to the shared rooms.
Zoned heat and the upstairs rooms
The house had central air and zoned natural-gas heating, as well as a gas-started fireplace in the family room. We kept those systems in mind as we opened sightlines between shared rooms, so the brighter connection downstairs did not come at the expense of comfort upstairs. We retained the heating zones and kept the family room arrangement around the fireplace. The result allowed daylight and views to pass more easily among the shared rooms while the upper floor still felt like a separate, quieter part of the house.
Public water and sewer, the laundry room upstairs, and the compact two-story layout reinforced the same approach: we improved how the existing kitchen and shared downstairs rooms worked instead of moving plumbing or adding space. The owners gained a more even relationship between the bright window areas and the rooms farther inside, with lighting that supported daytime use and evenings. The upstairs bedrooms remained private, and the downstairs rooms felt connected without becoming one large undifferentiated space.
City permit check
San Ramon classifies structural wall changes and new electrical circuits, outlets, or fixtures as permit work in its building codes and enforcement guidance. Its additional city information describes like-for-like cosmetic work, including flooring and fixture replacement without wiring or plumbing changes. We set this scope against that guidance by keeping the room connection within the existing arrangement, retaining the existing wiring and plumbing, and planning the lighting around the existing electrical layout.
If you are ready to make your home work better for your family, get in touch.


