Completed client project. At the 1963 house on Hallmark Drive in Sunset Terrace, Redding, the stair connects the lower living spaces with the upper bedroom side of a 2,140-square-foot wood-frame home. The owners wanted the kitchen and living room to share more light and feel connected, while keeping the living room fireplace and making the stair an easy route between the landings. The house has horizontal lap siding, a raised foundation and a metal roof. Its front entry sits beneath a gabled porch, and the living room faces mature trees and garden areas at the back of the level city lot.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
My first question was how the stair connected the two levels, and which rooms people reached from each landing. On site, we found that the lower landing met the living spaces and the upper landing served the bedroom side of the house. We kept that division legible: the lower level became more open for cooking and gathering, while the upstairs route stayed clear and direct. The stair and its landings shaped the kitchen and living room plan, so the new connection would not interrupt movement between the levels.
The stair and the rooms around it
The owners wanted an open view between kitchen and living room, but not a wholesale reworking of the house’s circulation. We measured the stair approach, the kitchen opening and the paths from the entry before changing the partition. The stair remained the organizing line between floors, with an open connection from the lower landing into the shared living area and a clear route upstairs to the bedrooms. That made the change useful beyond the kitchen: people could move between levels without cutting through the cooking work area.
The house’s wood framing and metal roof were part of the existing structure we considered as we developed the opening. We exposed the partition and followed its framing before setting the final opening size. The wall could not simply disappear without support, so we framed a defined opening that carried the load and kept the ceiling line consistent. The kitchen and living room then shared sightlines and daylight, while enough wall remained to organize the cooking area. We kept the wood-burning fireplace as the living room’s anchor rather than letting the new opening turn it into a pass-through.
The kitchen floor and cooking wall
The raised foundation gave us access beneath the floor, and we traced the kitchen drain and supply route before fixing the sink location. We kept the sink near its existing connections, avoiding a drain route across the kitchen and keeping the stair-side circulation open. The range stayed on the exterior cooking wall, not in the central route between kitchen and living room. The two-car garage and metal roof were part of the house’s existing construction, not a reason to invent a new appliance route through the ceiling.
Tile, wood and concrete were the recorded floor finishes, and the change in surfaces had made the connected rooms feel divided. We checked the floor transitions and subfloor from the raised foundation, then installed a continuous wood finish through the kitchen and living area. Tile remained in the wet rooms. We chose a natural, low-sheen finish that sat comfortably with the house’s mid-century character and did not compete with the fireplace. The result gave the lower level one visual field while preserving the more durable surface where water was expected.
The forced-air system also needed to serve the room as one space after the wall opened. We checked the supply and return locations in both rooms, adjusted the registers to suit the new arrangement, and set the cabinetry so it did not block airflow. We installed layered lighting over the kitchen work surfaces and in the living area, with dimming for the shared room. The wood-burning fireplace remained visible from the kitchen, and the clear route from the stair to the living room kept the room from feeling like one long work zone.
Water, ground and the finished connection
The owners also asked whether the local water called for special treatment at the fixtures. City of Redding water reports described soft water, with hardness varying across sampling points; the reported range helped us avoid specifying a softener as part of this remodel (City of Redding water information, City of Redding Consumer Confidence Report). The site’s level ground and landscaped outdoor areas supported keeping the work inside the existing footprint. Red Bluff loam on gentle slopes and the FEMA map’s Zone X designation informed our decision to leave the exterior drainage and foundation footprint unchanged.
The City of Redding Building Division lists wall alterations and electrical work as permit work; this scope included a wall opening and modified electrical work, so those items were specified as permit work for the responsible trades (City of Redding Building Division).
If you are ready to make your home work better, get in touch.


