Completed client project. The records available for this two-story home did not identify the electrical service or circuit capacity, heating and cooling equipment, water heater, sewer arrangement or foundation. Those limits shaped the work: lighting stayed at existing fixture locations, mechanical and water-heater work was not part of the scope, plumbing and wet areas remained in place, and the foundation was left untouched. Built in 1981, the mountain lodge-style house has about 3,000 square feet, six bedrooms and three baths. Its stucco or similar exterior, newer green standing-seam metal roof, dormers and segmented wings informed the finish plan. The family wanted the living room, dining area, kitchen lighting, wet bar, upstairs hallway and primary bedroom to feel more cohesive while keeping the pine, stone and alder. The two-story layout, roof pitches and wooded meadow setting guided choices for the hallway and main rooms.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
The owners wanted the fireplace, beams and woodwork to remain anchors, rather than replacing every finish to make the rooms feel new. Our on-site measurements, considered alongside the documented room layout and roof forms, shaped the plan. We followed the upstairs corridor into both wings and found that dormer returns and changing roof pitches limited the wall depth. That meant hallway storage had to fit between doors and angled transitions. The 10.84-acre wooded lot and meadow also made preserving the large windows and their views from the main rooms an important part of the design.
The pine living room and kitchen floor
The living room already had exposed wood beams, natural pine paneling, large windows and a stone masonry fireplace with a Quadra-Fire insert. Carpet softened the room but separated it visually from the vinyl or linoleum in the kitchen and dining area. We replaced the carpet in the shared main-level rooms with engineered wood, carrying the finish from the living room into the dining area. Carpet remained in the bedrooms, where the owners wanted a softer surface, and rugs kept comfort around the living room seating.
The recently renovated kitchen already had custom alder cabinets, granite counters and GE Cafe stainless appliances. We kept those in place and installed layered task and ambient lighting at the existing fixture locations. The large windows continued to bring daylight into the main rooms, while the new lighting made the counters and dining area easier to use after dark. The lodge-style construction, wood ceiling and roof forms also informed the fixture choices, which were selected to sit comfortably with the existing beams.
Quincy's listed humidity varied between July and March, so we chose and installed the engineered flooring with room conditions and flooring requirements in mind (Weather Atlas). We kept the floor transitions deliberate where the kitchen's existing surface remained, rather than forcing one material through every room. The result joined the living and dining spaces while respecting the kitchen's existing renovation.
The wet bar and the upstairs hallway
The small wet bar sat between the kitchen and living room, with a wood-panel base and stone-tile front. We updated its cabinetry and stonework to relate to the alder and granite nearby, while keeping the bar distinct from the kitchen. The stone fireplace remained the focal point from the living area, and the bar no longer read as a separate finish language between the rooms.
Upstairs, the yellow hallway walls, recessed lighting, carpet and multiple bedroom and bathroom doors had made the long passage feel like leftover space. We added built-in storage in wall sections with enough clear depth, after measuring door swings and dormer transitions on site. The route between the two bedroom groups stayed open, and the built-ins provided storage that had previously needed freestanding furniture. We refreshed the hallway color with a warmer earth tone and selected fixtures that related to the lodge materials downstairs.
The primary bedroom remained on the main level, with its angled dormer ceiling and office nook. We retained its footprint and worked with the existing ceiling shape, refreshing finishes rather than flattening the dormer character. The soft yellow, light green and light gray already used around the house informed the warmer, quieter palette carried through the rooms. Plumas County's General Plan encouraged the maintenance and rehabilitation of historic properties, guidance that supported retaining the pine, stone and alder while updating finishes (Plumas County General Plan).
Systems and county scope
The roof pitches and dormers constrained the hallway storage, while the two-story arrangement made keeping the route between the bedroom groups clear a priority. The existing kitchen plumbing, appliances, room layout and mechanical equipment stayed in place. Circuit capacity was not identified in the available records, so lighting remained at existing fixture locations. The main-room windows continued to connect the interior with the meadow and wooded setting, and the segmented wings remained unchanged.
Plumas County's Building Department lists moving or removing partition walls and altering kitchen or bathroom plumbing or electrical systems as permit work. This scope kept the partitions and plumbing in place, and limited lighting work to existing fixture locations (Plumas County Building Department, Building Permits and Inspections).
Get in touch with Amy to talk about your home.


