Completed client project. The owners came to us wanting the front room, kitchen and family room in their new home to feel brighter and more connected, especially around the window they used most. Their home on Napoli Street in San Marco, Pittsburg, was built in 2026, with about 2,371 square feet on a 6,596-square-foot lot, four bedrooms and three bathrooms. It was a two-story wood-frame house with blue-gray fiber cement siding, a composite shingle roof, a family room and a bonus room; the builder record also listed stucco among its construction materials. Three of the four bedrooms were upstairs. At the front, a recessed entry and covered porch sat beside the attached two-car garage, below an upper story that overhung the porch and garage slightly. My first question was which window mattered most in the family's daily life. They pointed us to the lower front-corner window, so we made the light around that opening the starting point for the interior finishes.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
The lot was flat, with a concrete driveway, front and back yards, and mature trees that provided shade and privacy. On site, we found that the upper-floor overhang and covered porch shaded the entry, while the lower front-corner window remained a distinct source of light for the front room. We measured that room and mapped the other openings before setting the lighting locations. The house had three upper windows, arranged across the front, and we kept the existing openings rather than changing the facade. The plan follows the home's documented openings, room layout and service facts, with the portfolio photographs serving only as references for finish selections.
The front window and the main-floor light
We used the lower window as the visual anchor, but the work was not simply about making that one room brighter. We carried a consistent lighting approach from the front room through the kitchen and family room, with focused light for the kitchen work surfaces and softer, dimmable light in the shared living areas. We kept the window treatments clear of the glass and selected finishes that reflected light without making the rooms feel stark. The family could move between cooking and relaxing without relying on the front window alone once daylight faded. We also planned furnishings to keep the front-room view open and the path between the shared rooms clear.
We kept the front entry and porch composition intact. The blue front door, white trim, stone veneer at the porch columns and garage edges, and the taupe roof shingles already gave the exterior a modern Craftsman character. The porch remained a sheltered arrival, and the front-room layout kept a clear view to the window rather than crowding it with tall storage. Inside, we used the same restrained approach: we kept the existing room boundaries and made the connection between the kitchen and family room feel more continuous through coordinated lighting and finishes, not by assuming a wall needed to come out. Storage and furnishings were selected to support that open feeling without obscuring the front-room light.
The kitchen, services and floor transitions
The house had electric heating, central air, seller-owned photovoltaic panels, a gas water heater and a gas range. We kept those systems in view as we laid out the lighting and kitchen work, and coordinated the lighting selections with the existing solar-equipped service. The range stayed in the kitchen, and the water heater and utility access remained reachable. That let the kitchen feel more settled through its finish selections without making everyday service harder.
The attached two-car garage and laundry hookups only mattered where the household moved between the garage, laundry and living spaces. We kept the laundry connections in place and arranged storage around them, rather than shifting hookups and adding plumbing work. Existing flooring included laminate, tile and carpet. We mapped the transitions and used a coordinated finish palette to make the changes from one room to another feel intentional, while keeping the different surfaces where they suited the room. The public water supply and public sewer also stayed as existing services, not reasons to relocate fixtures for appearance alone.
The owners wanted the front room, kitchen and family room to feel more connected, and the work followed the house's actual structure and services: we kept the window openings, room boundaries, kitchen range, laundry hookups and service routes, then used light and finish continuity to make the rooms work together. The family had a clearer, more even light through the shared spaces, while the front window still gave the front room its own connection to the outdoors.
Pittsburg's building FAQs describe water-efficient fixture standards, which informed the fixture selections (City of Pittsburg building FAQs). Delta Diablo's sewer-permits page identifies sewer work in its service area as permit work; this scope kept the public sewer connection and drains in place, so sewer changes were outside the plan (Delta Diablo sewer permits).
If you are ready to make your home work better, get in touch.


