Completed client project. The owners came to me with a one-story house built in 1973, about 1,559 square feet on a 7,500-square-foot corner lot in Pinole. The stucco and wood-sided home had four bedrooms and two bathrooms, a pitched asphalt-shingle roof, and an attached two-car garage. The family wanted the home on Hermosa Street to feel more considered and easier to move through, while keeping the work focused on finishes and the existing layout. The kitchen had stone counters, a breakfast bar and a gas range; the living room had a brick, wood-burning fireplace; and the tiled entry hall led past the garage, where the laundry hookups were located. Records named public water and public sewer, seller-owned photovoltaic panels, gravity and forced-air natural-gas heating, and no cooling equipment. They did not identify the foundation type, electrical service capacity, available circuits or water heater. Those limits shaped the work: the plumbing locations, roof, heating and existing service connections stayed in place, and lighting choices did not assume undocumented electrical capacity.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
The records and the house's existing layout helped set the scope. The garage laundry hookups were where the records placed them, and the front driveway climbed gently toward the attached garage. The single-story house had no visible additions, a continuous pitched roofline and wide eaves. Those features made a restrained approach a better fit than changing the footprint. I kept the existing kitchen and laundry plumbing locations, retained the shingle roof, and organized the work around surfaces, lighting, storage and the connection between the kitchen and living room. Because the foundation type was not identified, I kept the floor and plumbing work within the existing arrangement.
The kitchen wall and the living room fireplace
We measured the kitchen and living room together before choosing the scope. The kitchen already had a breakfast bar and updated working surfaces, so I kept its basic arrangement and gas cooking rather than shifting the sink or depending on an undocumented panel capacity. We refreshed the cabinetry and surrounding finishes, and added layered lighting for the work surfaces and shared room. The kitchen remained useful as a kitchen, while the updated materials made it feel related to the living room instead of like a separate finish scheme. The lighting plan also respected the fact that the records did not establish the available circuits.
The brick fireplace stayed the anchor of the living room. We kept the opening between the two rooms within the existing layout rather than removing a wall whose construction was not established in the records. The seating arrangement kept the fireplace visible from the kitchen, and a consistent wall color and coordinated finishes connected the rooms. The house’s one-story form and shingle roof also meant we could keep the existing ceiling line and avoid a ceiling redesign.
The entry, garage and whole-home finishes
The tiled entry hall, wood front door with its decorative glass inset, and attached garage formed the everyday route into the house. We refreshed the entry finishes and lighting, then kept the garage laundry hookups in place so laundry continued to work without moving water or drain lines. The garage-to-house path remained clear, and the entry materials held up as a distinct transition from the living spaces rather than spreading tile through the whole home.
Across the bedrooms and shared areas, we coordinated paint, flooring and lighting so the four-bedroom layout felt consistent without erasing the rooms’ separate uses. We retained the existing window openings and exterior siding, refreshed the beige and brown exterior palette, and trimmed back the established landscaping to define the front and side paths. The corner lot, gently rising driveway and mature perimeter planting favored careful edits over extensive hardscape changes. The soil survey mapped Los Osos clay loam with 15 to 30 percent slopes, and the FEMA map placed the property in flood zone X. We kept driveway and yard grading out of the remodel scope. The CAL FIRE map classified the area as NonWildland, and the Title 24 climate map placed it in climate zone 3.
The systems and the permit checks
The finished scope kept public water and public sewer connections in service. We left the kitchen sink and laundry drains at their existing locations, and kept sewer-lateral work out of the remodel. The gas range remained in place, as did the seller-owned photovoltaic panels and the existing gravity and forced-air natural-gas heating. With no cooling equipment identified in the records, cooling-system work was not added to the scope. The water heater and foundation type were also undocumented, so neither was treated as a known replacement or construction condition. The fireplace remained wood-burning. Together, these decisions kept the project focused on the rooms and finishes the owners wanted to improve without making assumptions about unrecorded systems.
The City of Pinole Building Division identifies electrical work as permit work under its adopted California Building Standards Code, including Title 24 energy-efficiency requirements; this scope kept the walls and plumbing locations in place, and the lighting plan was set against the electrical work category without assuming service or circuit capacity (City of Pinole Building Division). Pinole’s Public Works page states that sewer-lateral repairs and video reviews require a Private Sewer Lateral Permit; no lateral repairs or video review were part of this scope, and the property owner remains responsible for the private lateral (City of Pinole Public Works permits).
Get in touch to talk about your home.


