Completed client project. The owners came to us for a coordinated interior finishing and furnishing plan shaped around the windows: a room-by-room decision about what to enlarge, replace, add, or leave. Their house on Honeysuckle Hill Avenue in Cypress at The Fairways, Galt, was built in 2026 and measured about 3,247 square feet on a 6,471-square-foot lot, with five bedrooms and four and a half baths. Its masonry and wood-frame construction, tiled gable roof, stone veneer accents, smooth stucco walls, and horizontal siding on the second-floor projections established the palette. The house-specific room and finish record gave us a starting point, and we measured the openings on site before setting the scope.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
My first question was which rooms needed a different relationship to daylight, and which windows already did their job. The record names full dual-pane windows with screens, but gives no opening count or room-by-room schedule. On site, we mapped the existing openings against the foyer, office, great room, ground-floor guest suite, loft, and bedroom areas, noting the contrast between the framed upper projections and the lower masonry and stucco walls. The flat lot has no visible mature trees to shade the house, so sun exposure mattered alongside the view from inside. We kept the existing window openings rather than enlarging or adding them, and retained the dual-pane units. The window-by-window plan focused instead on the surrounding finishes and on adding light at the garage door.
The framed upper windows and the front elevation
The second-floor projections give the house its horizontal lines, while the shutters and the stone at the porch columns and garage make the front elevation read more traditionally. We chose simpler trim in place of the shutters, keeping the window openings legible without adding another strong shape to the façade. We did not cut new openings into the masonry or wood framing. That choice kept the existing wall construction and tiled gable roof intact while connecting the windows to the cleaner stucco and siding finishes.
We also specified glazed panels for the garage door. The large front-facing tandem garage occupies much of the front-right footprint, and glazing brings daylight into it while reducing the visual weight of the door. The attached garage has direct interior access near both the kitchen and office, so we kept that route clear and treated the threshold as part of the house’s circulation. The front porch, covered patio, and low-maintenance front landscaping informed the restrained exterior selections around the windows.
The office, guest suite, and open living rooms
The first-floor office sits between the kitchen and garage entry, while the private guest bedroom and ensuite sit by the foyer, away from the main living area. We kept those room relationships in place. In the office, we added built-in closed storage and improved sound separation at the door, keeping work materials contained without narrowing the route from the garage. The foyer’s volume ceiling and stair remain open, and the view from the entry toward the great room stays unobstructed.
The kitchen already had Quill-stained cabinetry, Calacatta Abezzo quartz, an oversized island with an integrated sink, pantry storage, and stainless steel appliances. We kept the sink, cabinets, and cooking area in their existing positions rather than changing the plumbing layout. The open kitchen, dining area, and great room connect to the covered rear patio, so we coordinated finishes and lighting across those spaces. We retained the existing mix of carpet, laminate, and tile where it suited the rooms, and used rugs and upholstered seating in the great room to soften sound below its cathedral ceiling.
The house has central, multizone heating and cooling, public water and sewer, and solar power. Keeping the window locations and room layout in place allowed the finishes and lighting to work with those existing systems. The laundry’s electric hookups also remained in place. The parcel map places the lot in FEMA flood zone X, an area of minimal flood hazard. Galt’s floodplain rules describe elevation requirements for properties in Special Flood Hazard Areas, so flood elevation work did not shape this interior window scope (Galt Municipal Code, Chapter 19.20).
The loft, laundry, and upstairs suite
Upstairs, the loft sits centrally among the bedrooms, and the laundry room is close by, with electric hookups and linen storage. We added closed storage in the loft while keeping the route between bedrooms open. In the laundry room, we installed a folding surface and additional storage, leaving the washer and dryer hookups in place. That decision fit the existing service locations, including the 220-volt electric service in the laundry.
The primary suite remains across the open space above the great room. Its bedroom, walk-in closet, dual vanities, separate shower, and soaking tub support a private retreat, so we retained the suite’s arrangement and existing plumbing. We included its windows in the same opening-by-opening review: the existing units stayed, and the finishes around them remained quiet so daylight, rather than extra trim, stayed the focus.
Galt’s Building Division lists kitchen or bathroom changes to plumbing, electrical or mechanical systems, or structural elements as permit work. This scope kept the kitchen and bath fixtures, plumbing, and structure in place; lighting installation was specified as electrical permit work (City of Galt Building Division).
Get in touch to talk about your home.


