Completed client project. The owners came to us with a newly built home in Serrano Country Club, El Dorado Hills, and wanted the four full bathrooms to feel more private, warmer, and easier to use across the day. Built in 2025, the custom, detached two-story house measured about 4,762 square feet on a 24,394-square-foot lot and had four bedrooms, four full baths, and a half bath. The main floor held a junior primary suite and another ensuite bedroom on opposite sides of the house, while the upper floor held the primary suite, an additional ensuite bedroom, and a family room. We developed the plan from the home's recorded room layout and construction details. The owners’ question was how to refine the bathroom finishes without losing the privacy built into that arrangement. The portfolio photographs we used to discuss finish direction showed finishes, not this house.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
My first question was which bathroom routes felt least private during the owners’ daily routine. In reviewing the two-floor layout, we found that the house’s split main-floor suites already separated sleeping areas, while the upper-floor primary bath sat within the private suite, alongside its walk-in closet and balcony. The four full baths were already distributed across both stories; the half bath gave the household another option outside those bedroom suites. That made the opportunity a better experience inside each full bath and a clearer sense of separation at the main-floor guest suite, not adding another bathroom or changing the existing plumbing locations. We considered the approach to the guest suite and kept its bath and bedroom footprint intact.
The main-floor guest bath and suite entry
The main-floor guest ensuite sat near the open living, dining, and kitchen areas. We found the route to its door as important to the feeling of privacy as the finishes inside the bath. We defined the guest suite entry with a clearer transition and considered storage there, so a guest could reach the bedroom and bath without the suite feeling like an extension of the kitchen. The bath’s existing fixture positions and footprint guided the finish selections, keeping the plan aligned with the house’s established service routes and adjoining living spaces.
We chose warm, stone-look tile and a natural wood vanity to bring more texture into the home’s white interior. The pale oak floors, tongue-and-groove ceilings, and black-framed Sierra Pacific windows gave us a clear palette to work from, while the bath materials established durable, private surfaces. We selected a well-lit mirror and matte black hardware to relate the room to the black metal stair railing and window frames. The house’s dual-pane windows were already part of its glazing package, so we considered interior privacy treatments rather than changes to the exterior openings. For furnishing, we coordinated the vanity storage, mirror, and lighting so they would read as one considered composition.
The upstairs primary bath and the two-story systems
The upstairs primary bath already included double sinks, a soaking tub, a separate shower with multiple heads, and quartz counters. We kept that arrangement central to the selections and planned drawer-focused vanity storage, then chose warm, even lighting to carry the suite’s wood tones into the bath. The primary bedroom’s fireplace and private balcony made the suite a destination in its own right, so we kept the bath finishes calm rather than adding another strong focal point.
The builder record listed a tankless water heater, central multizone heating, and central cooling with multiple units. Those systems shaped our decisions: we retained the existing fixture count and locations and coordinated the bathroom selections with the house’s installed hot-water and mechanical systems. The tile hipped roof also stayed outside the interior scope, so the plan did not introduce roof changes. The house had public sewer service, and local information on Serrano’s public sewer connection helped us keep the bathroom scope on the existing drain arrangement rather than treating the home as an onsite wastewater property (local sewer-service information).
The other ensuite baths and the daily routine
We carried the same approach through the other ensuite bathrooms: preserve the locations and circulation that made the split-bedroom layout work, and bring each room into a warmer, more consistent finish language. The main-floor bedroom suites remained apart from one another, and the upper-floor secondary ensuite remained separate from the primary suite. We coordinated the finish choices across the four full baths without making them identical, so each suite kept its own sense of privacy while belonging to the same house.
The home’s two stories mattered to the sequence as much as to the design. We planned the bathroom work in stages, keeping the other baths available as each room was out of service. The two-story layout, the existing four-car garage areas, and the open connection between the kitchen and living room stayed as built. The result kept the same well-distributed bath count, with a more considered guest-suite entrance and more useful storage in the upstairs primary bath. The home worked as a set of private suites rather than a collection of bathrooms competing for attention.
El Dorado County’s Fire-Safe Regulations identify new construction, additions, and substantial remodels in designated areas as subject to California Building Code Chapter 7A. This bathroom-finish scope stayed within the existing exterior envelope and did not include exterior work (El Dorado County Fire-Safe Regulations).
Get in touch if you would like to talk about making your home work better.


