Cupertino & Silicon Valley Interior Designer · Amy Kunst, NKBA 📞 916-756-5977 Get Free Quote

South Stelling Road interior finishes

A modern luxury home with a large circular helipad and a helicopter parked on it, surrounded by landscaped greenery and hills in the background
Portfolio image, not a photo of the featured home.

Completed client project. The owners came to us with a newly built, 4,073-square-foot home on a flag lot in Cupertino, and asked us to shape the window and lighting finishes. The two-story stucco house, completed in 2026, has six bedrooms and five and a half bathrooms. Its open kitchen and family room connect to a covered patio through large sliding doors; elsewhere, the house includes a high-ceilinged living room, a separate office, an upstairs primary suite, and an attached two-car garage with a carport. The window record named dual-pane glazing and the large family-room sliders, but did not give a room-by-room count. Our plan focused on the office opening, daylight in central spaces, and shades for the large windows. On South Stelling Road, the design decisions began with what the new house already offered: clear views, an indoor-outdoor connection, and a consistent modern finish palette.

The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.

The family-room sliders and the patio

We began with the family room because its large sliding doors connect the shared space to the covered patio. We kept the doors and their opening intact, making the patio connection a fixed point in the window plan. We also kept the wide-plank oak flooring, quartz waterfall-edge island, full-height kitchen cabinetry, and full backsplash. Those finishes already give the open kitchen and family room a consistent, modern character, so the new selections were designed to sit comfortably alongside them rather than compete with them.

The two-story structure and concrete perimeter and slab foundation shaped our decisions about daylight in the central rooms. The house has no basement, so we planned a solar tube to bring light into the central interior from the composition roof. The roof and the home’s listed solar utility were considered together; the new roof opening was kept separate from the solar equipment. A restrained ceiling finish around the tube lets the added light support the existing high ceilings. This choice adds a new light source without changing the family-room sliders or the established finishes below.

Top-down view of a wooden kitchen drawer organizer containing measuring spoons, whisks, knives, and glass measuring cups
Portfolio image, not a photo of the featured home. Designed & Curated portfolio: Top-down view of a wooden kitchen drawer organizer containing measuring spoons, whisks, knives, and glass measuring cups.

The office opening and the large windows

The office was the clearest place to increase daylight. We enlarged its window opening and selected interior trim and an exterior stucco finish that work with the home’s clean lines. The new window remains dual-pane, consistent with the glazing already specified for the house. An adjustable shade gives the owners control over glare while preserving daylight and the office’s sense of openness.

For the larger windows, we kept the glazing and selected adjustable roller shades rather than reducing the openings. The property has no visible large trees to provide shade, and the large windows could admit summer heat. We chose light-filtering fabric for shared rooms, where daylight matters across the open kitchen and family room, and a more light-blocking option where greater control was needed. The available window record does not establish identical exposure at each opening, so the shade selections were considered window by window. A consistent finish across the treatments helps the different rooms feel connected.

The new-house finish plan also considered how storage and furnishings would sit in relation to the glazing. We kept the family-room sliders visually clear and treated built-in storage as a considered selection for organization, rather than placing furnishings where they would interrupt the patio connection. The result is a set of choices for light, shade, storage, and furnishings that supports the open layout without replacing the oak floors or kitchen finishes.

The roof, systems, and the finished rooms

The central forced-air heating and cooling, public water supply, and inside laundry stayed outside the window scope. The work focused on the office opening, the central solar tube, and window treatments, not the home’s mechanical or plumbing layout. The open staircase, high ceilings, and wide-plank oak floors remain defining features, while the office window and central light source bring daylight to areas that have less direct connection to the exterior. The family room keeps its broad patio opening, with shades selected to manage glare without giving up that connection.

We also checked Cupertino’s all-electric building rule. The city’s page stated that enforcement of its all-electric building ordinance had been suspended; because the project retained the existing central forced-air heating and cooling and did not change the home’s equipment, the rule did not lead us to alter the window and lighting selections (City of Cupertino, All-Electric Building).

Get in touch to talk about a project for your home.

A modern living room with large floor-to-ceiling windows offering a scenic view of a green landscape and a circular building, featuring a fireplace, leather chairs, a sectional sofa, and contemporary decor
Portfolio image, not a photo of the featured home. Designed & Curated portfolio: A modern living room with large floor-to-ceiling windows offering a scenic view of a green landscape and a circular building, featuring a fireplace, leather chairs, a sectional sofa, and contemporary decor.
Call (916) 756-5977Book a Consultation