Completed client project. The owners came to us for interior finishes and furnishing in their 2026 house on Ellingson Way in Cohasset. The one-story house has about 2,257 square feet on an 8,200-square-foot lot, synthetic-stucco construction and a concrete slab foundation. Its three bedrooms and two-and-a-half baths sit within a plan that connects the kitchen, dining area and family room around an island. The coffered family-room ceiling, den near the entry, private primary suite, two secondary bedrooms with a shared bath, and three-car garage reached through the laundry room set the starting point. The owners wanted more useful workspace and seating in the kitchen, a brighter laundry room, and a clear distinction between the connected rooms and the den.
The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.
The project decisions began with the house's service and systems. The record identifies a 220-volt outlet in the laundry room, but not service capacity or a kitchen 220-volt circuit, so we kept kitchen appliance choices within the listed information and left the laundry outlet for laundry equipment. The public sewer and district/public water connections remained as recorded. The concrete slab made moving the kitchen sink away from its existing plumbing location an unnecessary change, so we kept it in place. The record does not identify heating and cooling equipment or a water heater, so neither system was included in the finish plan. We also kept the composition roof and double-pane windows, which are construction features of this new house. The project location is in the Cohasset area covered by Cohasset housing data; the choices here follow this house's recorded rooms and construction.
The island and the connected rooms
We treated the kitchen, dining area and 19-foot-2-inch by 20-foot family room as one connected space. The open plan already linked cooking, eating and gathering, while the family room's coffered ceiling gave that area its own definition. We kept the room connections and ceiling lines, selecting finishes that support the continuous plan without changing its layout.
We increased the island's usable work and seating area while keeping the range and sink in their existing positions. Keeping the sink over its current plumbing location avoided routing a new drain through the concrete slab. The island remained free of cooking equipment, leaving its surface available for preparation and seating. Since kitchen circuit capacity was not listed, we did not add an induction range or second oven to the scope.
A warm, matte porcelain floor runs through the kitchen, dining area and family room, with a quiet grout color to let the connected rooms read as a continuous space. The den has a separate, warmer oak finish so it remains distinct. We layered task lighting over the island with softer dining light and dimmable general lighting in the family room. The seating and television arrangement keeps the route to the covered rear patio clear and leaves the coffered ceiling visible.
The laundry route and the den
The laundry room sits between the primary suite and the three-car garage, so its layout supports movement between household work and the garage entry. We used the wall beside that entry for a compact bench, closed storage and hooks as a drop zone. A window brings daylight into the laundry room while leaving the washer, dryer and sink area usable. The listed 220-volt outlet remains available for laundry equipment, separate from kitchen appliance decisions.
The den measures 11 feet by 12 feet 6 inches and has an 11-foot ceiling. We kept it as a flexible room near the entry rather than opening it into the family room, and arranged the furnishings to make better use of light from its existing window. The primary bedroom measures 15 feet 8 inches by 15 feet 6 inches and retains its private bath and walk-in closet. The two secondary bedrooms remain grouped around their shared bathroom. The house's public water and public sewer connections stay unchanged alongside the bathroom fixtures and plumbing locations.
The site plan shows a slight fall from front to back, a south-facing front porch and a covered patio at the rear. We kept the patio route open and the yard usable rather than expanding the house footprint. The FEMA map identifies flood zone X, and the soil survey map identifies well-drained Conejo clay loam with a low slope. That site information supported keeping the outdoor arrangement within the established footprint. The one-story layout, concrete slab and recorded service locations shaped the interior choices, while the front-yard lawn and sprinklers remained undisturbed.
Butte County Building Division guidance lists plumbing fixture modifications as work that may require a permit; this plan kept the sink and bathroom fixture locations unchanged, leaving plumbing fixture modifications outside the scope (Butte County Building Division).
Get in touch with Amy to talk about your home.


