Folsom & Greater Sacramento Interior Designer · Amy Kunst, NKBA 📞 916-756-5977 Get Free Quote

Errol Court kitchen and living room remodel in Folsom

Three people are sitting and standing around a black sofa in a warmly decorated living room with framed artwork and colorful pillows
Portfolio image, not a photo of the featured home.

Completed client project. The owners came to us with a custom, single-story house in Hillcrest, Folsom, built in 2005 and measuring about 3,926 square feet. Its stucco walls, tile roof and 14-foot ceilings set the scale; inside, the three-bedroom, three-and-a-half-bathroom home had a kitchen open to the family room, while the formal living and dining rooms sat beyond a substantial partition. They wanted that wall opened so the kitchen could connect with the formal rooms without losing the character of either space. The house records described the one-story layout, the kitchen and family-room relationship, and the formal rooms near the entry, which gave us a clear starting point for the work.

The photographs on this page are from the Designed & Curated portfolio and show finishes we have used on other projects. They are not photographs of this house.

My first question was what the wall carried and what ran through it. On site, we found the partition supporting the ceiling and roof framing, a likely condition in a single-story house with a tile roof and broad interior spans. The one-story construction and tile roof shaped how we approached the opening: the new beam had to carry the load across a wide span while meeting the tall ceiling line. We also traced the range hood route before demolition. That finding shaped the job: we opened the wall with a structural beam, kept the range and hood in place, and avoided creating a new opening through the stucco exterior. The kitchen already had a sink island, slab granite counters, a built-in refrigerator and a gas range, so the owners’ request was about the connection between rooms, not a new kitchen layout.

The kitchen partition and the ceiling line

The wall separated the kitchen from the formal living and dining rooms, while the family room already joined the kitchen on the other side. We measured the opening against the formal entry and the 14-foot ceiling so the new connection felt intentional from the front rooms as well as from the kitchen. Once we confirmed the framing at the partition, we specified and installed a beam across the opening to carry the load that the wall had taken.

The beam sat below the existing ceiling plane, so we enclosed and finished it as a defined band rather than disguising it as a flat ceiling. That choice preserved the tall-room proportions and made the transition legible: the kitchen, family room and formal rooms shared a visual axis, while the ceiling detail still marked where the wall had been. We kept the ornate iron front door and the formal entry as the house’s arrival point, rather than allowing the new opening to make the front rooms feel like an extension of the kitchen.

A modern kitchen with navy blue cabinetry, white marble countertops, brass fixtures, and wooden flooring under a vaulted ceiling with skylights
Portfolio image, not a photo of the featured home. Designed & Curated portfolio: A modern kitchen with navy blue cabinetry, white marble countertops, brass fixtures, and wooden flooring under a vaulted ceiling with skylights.

The range hood and the kitchen’s working side

We kept the gas range and hood on their existing wall and retained the island sink. Before opening the partition, we traced the exhaust route and confirmed that the wall work did not require a new exterior termination. That mattered in this house, where the stucco exterior, tile roof and covered rear patio were all part of a carefully composed indoor-outdoor setting. Keeping the cooking equipment in place also meant the project could focus on the connection between rooms instead of changing the kitchen’s plumbing or moving its main work areas.

The house’s central heating and cooling served multiple units and zones. We checked the supply and return locations around the partition as we laid out the opening, then kept the room-side air paths clear in the finished work. The kitchen and formal rooms could now share the open volume without blocking the existing zoned system. The house also has 220-volt electrical service, a public water source and sewer in the street. Those systems stayed outside the wall-opening scope, which kept the work focused on the partition rather than expanding into service changes. We also preserved the slab granite counters, built-in refrigerator and existing cabinetry outside the wall work, so the new opening became the main change rather than a reason to replace sound kitchen elements.

The floor through the new opening

Engineered hardwood ran through the main rooms, and the wall’s former footprint interrupted that continuous surface. We removed the flooring at the partition carefully, patched the exposed strip with matching material, and blended the repair into the surrounding boards. From the kitchen, the floor now continued into the formal rooms without a hard visual stop where the wall had stood. The furniture and lighting continued to distinguish dining and living areas, while the open route made movement between them more direct.

The opening also changed how the generous rooms related to the landscape beyond the house. The formal rooms and kitchen now shared more of the daylight from the expansive windows, and the connection toward the covered California patio felt clearer from the interior. We kept the work concentrated on the wall, its beam and the floor repair, so the owners retained the existing kitchen features and the house’s established room identities.

A bright kitchen with yellow walls, white cabinets, a central island with stools, and open wooden shelves with plants and dishes
Portfolio image, not a photo of the featured home. Designed & Curated portfolio: A bright kitchen with yellow walls, white cabinets, a central island with stools, and open wooden shelves with plants and dishes.

Folsom’s structural-work classification

Folsom Building Services classifies structural changes as permit work and describes plan check as application review for code compliance (City of Folsom Building Services, plan check). We set the opening against that classification: the partition was opened with a structural beam, while the range, hood route, plumbing and heating and cooling remained in place. Related guidance: Oakwood Remodel.

Get in touch to talk about opening up your kitchen.

Call (916) 756-5977Book a Consultation